Printing area
Putting the pieces within the printing area.
Once we have the pieces drawn, we have to place and order them within the printing area in order to send them to the laser. The machine printing area is 960x460mm. We'll have to put the pieces drawing into rectangles with this dimension (use as many rectangles as you need).
ATTENTION, TEST MATERIAL SIZE (if the material measures do not match the printing area, you'll have to adapt the drawing measures corresponding to the material measures. You will always have to take into account that the maximum measure is 960x460mm).
During this process we have to consider the following recommendations:
· The pieces should be grouped to the fullest, but between them we must leave 2mm as minimum distance.
Example. Minimum distance between pieces.
· The minimum distance between any piece and the margin of the printing area must be 5mm.
Example. Minimum distance to the margin.
During this process we have to consider the following recommendations:
· The pieces should be grouped to the fullest, but between them we must leave 2mm as minimum distance.
Example. Minimum distance between pieces.
· The minimum distance between any piece and the margin of the printing area must be 5mm.
Example. Minimum distance to the margin.